Sika SikaBond FoamFix Foam Adhesive 750 ml Beige
Necessary accessories
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Accessories
Product details
| 1 can is enough for an area of ~ 13 m² | Fast setting |
| Good sound insulation | Very good dosage with foam gun |
Product description
is a gun-applicable and fast-curing 1-component polyurethane (PUR) foam adhesive with low expansion for fixing insulation and gypsum boards to various substrates.
- Very good dosage with foam gun
- Good yield, 1 can is sufficient for an area of ~ 13 m²
- Good adhesion to various substrates: Concrete, lime and bitumen coatings, bituminous waterproofing membranes with positionally stable sprinkling, bricks, wood, plaster, masonry, plaster, metal and polyvinyl chloride (PVC)
- Fast curing
- Good initial adhesion and tensile strength, wind suction stable
- Can be used indoors and outdoors, permanently flexible
- Can be used for vertical and horizontal bonding
- Good sound insulation
SikaBond FoamFix is quick and easy to use and especially suitable for the secure bonding of common gypsum plasterboard and gypsum fiberboard in drywall construction as well as the bonding of the following insulation boards:
- Polystyrene XPS/EPS (with or without bituminous lamination layer)
- PUR/PIR mineral fleece or aluminum laminated (depending on manufacturer)
- Mineral fiber
Details
- Chemical base: 1-component polyurethane, moisture-curing
- Density: ~ 18 kg/m³
- Tensile strength: ~ 7 N/cm²
- Shear strength: ~ 7 N/cm²
- Fire behavior: Class E
- Thermal conductivity: 0.031 W / (m - K)
- Sound insulation: RST,w(C;Ctr) = 61 (-1; 4) dB (ift SC-01/2)
- Service temperature: From - 40 °C to + 80 °C
- Air temperature: Between 0 °C and + 45 °C
- Relative humidity: From 30% to max. 95%
- Substrate temperature: Between 5 °C and + 45 °C
- Substrate humidity: Dry. Do not moisten or pre-wet.
- Curing time: ~ 16 minutes (cut resistant at 20 mm film thickness) (+ 23 °C / 50 % r. h.), fully cured after ~ 12 hours.
- Tack-free: ~ 7 minutes (+ 23 °C / 50 % r. h.)
- Storage
- Shelf life: 12 months
- Storage conditions: Store in a cool, dry place protected from direct sunlight in undamaged original containers at temperatures between + 15 °C and + 25 °C. Cans must be stored upright.
Features
| Type of adhesive, sealant | Adhesive |
| Colour | Beige |
| Filling quantity | 750 ml |
| Weight | 790 g |
| Usage type | PUR foam adhesive |
| Signal word | Danger |
| ean | 7612895644912 |
| Manufacturer Article No. | 101.176 |
Legal information
Hazard warnings
Use biocidal products with care. Always read the label and product information before use.
Danger
H222 - Extremely flammable aerosol.
H229 - Pressurized container: may burst when heated.
H315 - Causes skin irritation.
H317 - May cause allergic skin reactions.
H319 - Causes serious eye irritation.
H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 - May irritate the respiratory tract.
H351 - Suspected of causing cancer (state route of exposure if there is conclusive evidence that no other routes of exposure cause this hazard).
H373 - May cause damage to organs (state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if there is conclusive evidence that no other routes of exposure cause the hazard).
General Safety Information
Manufacturer information
GUG Vertriebs-GmbH
Von-Braun-Str. 21
48683 Ahaus
Germany
info@gug-ahaus.de
Necessary accessories
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
