IVT SH 5.612 LED strip flexible self-adhesive 12 V 2 m
Availability:
Available in 3-5 working days
Only small number of pieces available
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| High quality | Flexible |
Product description
This extremely flexible LED strip with 120 ultra-bright SMD LEDs can be used for a wide range of indoor and outdoor applications. Thanks to 826 lm and a light color of 4,500 K (neutral white), it provides large-area illumination. Due to the potting, the LED strip is protected against dust and water according to IP 65.
Recommended use: Due to its low power consumption of only 9.6 W, it is ideally suited for installation in vehicles and boats, as well as for operation as part of a solar system with an operating voltage of 12 V.
Details
The high-quality light strip is self-adhesive due to the 3MTM adhesive tape attached to the back and can thus be permanently attached to the desired location (e.g. wall or ceiling).
Ideal for curved surfaces and low installation heights
The extremely flexible LED strip is ideal for curved surfaces and low installation heights. If necessary, it can be individually shortened to the length you require.
However, you should note that the cut LED strip no longer has the specified IP degree after shortening.
Simple connection: Pre-assembled with 1 m connection cable
Pre-assembled with a 1 m twin cable, which is already stripped and pre-tinned at the end, uncomplicated connection is possible.
120 SMD LEDs: ultra-bright, energy- and space-saving
120 SMD LEDs guarantee a large-area and bright illumination in the smallest space indoors and outdoors. Despite low power consumption of max. only 9.6 W, a luminous flux of 826 lm is achieved
The color temperature is 4,500 K (neutral white). The service life of the LEDs is at least 36,000 h.
Can be shortened individually
The length of the LED strip can be adjusted flexibly. Every 50 mm it can be shortened individually. However, you should note that the cut LED strip no longer has the specified IP degree after shortening.
Water resistant according to IP 65 due to potting
The LED strip is suitable for both indoor and outdoor use. Due to the potting the LED strip is protected against dust and water according to IP 65.
Scope of delivery
LED strip SH-5.612, 12 V DC, 2 m, with connection cable
Recommended use: Due to its low power consumption of only 9.6 W, it is ideally suited for installation in vehicles and boats, as well as for operation as part of a solar system with an operating voltage of 12 V.
Details
- High quality flexible LED strip
- 12 V DC operating voltage
- Length 2 m, can be shortened individually every 50 mm
- Ultra bright with a luminous flux of 826 lm
- Easy mounting by means of 3MTM adhesive tape
- Water resistant according to IP 65 due to potting
- Lifetime LED at least 36,000 h
- Pre-assembled with 1 m connection cable
- Power supply 12 V DC
- Illuminant 120 SMD LED 3528
- LED spacing 16 mm
- Power consumption (max.) 9.6 W
- Luminous flux (max.) 826 lm
- Efficiency 86 lm/W
- Color temperature 4500 K | neutral white
- Color rendering index CRI 80
- LED life > 36,000 h
- Dimmable by reducing supply voltage
- Protection class lll
- Protection class IP 65
- Temperature range -25 °C to +70 °C
- Mounting 3MTM adhesive tape
- Connection cable 1 m twin cable, open ends
The high-quality light strip is self-adhesive due to the 3MTM adhesive tape attached to the back and can thus be permanently attached to the desired location (e.g. wall or ceiling).
Ideal for curved surfaces and low installation heights
The extremely flexible LED strip is ideal for curved surfaces and low installation heights. If necessary, it can be individually shortened to the length you require.
However, you should note that the cut LED strip no longer has the specified IP degree after shortening.
Simple connection: Pre-assembled with 1 m connection cable
Pre-assembled with a 1 m twin cable, which is already stripped and pre-tinned at the end, uncomplicated connection is possible.
120 SMD LEDs: ultra-bright, energy- and space-saving
120 SMD LEDs guarantee a large-area and bright illumination in the smallest space indoors and outdoors. Despite low power consumption of max. only 9.6 W, a luminous flux of 826 lm is achieved
The color temperature is 4,500 K (neutral white). The service life of the LEDs is at least 36,000 h.
Can be shortened individually
The length of the LED strip can be adjusted flexibly. Every 50 mm it can be shortened individually. However, you should note that the cut LED strip no longer has the specified IP degree after shortening.
Water resistant according to IP 65 due to potting
The LED strip is suitable for both indoor and outdoor use. Due to the potting the LED strip is protected against dust and water according to IP 65.
Scope of delivery
LED strip SH-5.612, 12 V DC, 2 m, with connection cable
Features
| Type of electric light | Lichterketten |
| Design | SH-5.612 |
| Number of LEDs | 120 Stück |
| Weight | 0,2 kg |
| Dimensions (LxWxH) | 100 x 1,2 x 0,5 cm |
| Lighting duration | 36000 h |
| Luminous flux | 826 lm |
| ean | 4030072570305 |
| Manufacturer Article No. | 570030 |
Legal information
Manufacturer information
Innovative Versorgungstechnik
Dienhof 14
92242 Hirschau
Germany
info@ivt-hirschau.de
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Article characteristics
Battery 12 V
12 V battery operation possible
