Dino KRAFTPAKET Polishing Machine Rotation 710W

Small surfaces such as bumpers, mirror caps, fender flares, sill plates, A-pillars, C-pillars or strongly curved/curved shapes require special attention.

This Dino KRAFTPAKET rotary polishing machine was developed for this application. Three small backing pads with 30, 50 and 74mm Ø allow polishing on the smallest surfaces.
An 80 mm drive spindle extension adapter is included for hard-to-reach and low-lying areas. The adapter also allows convenient polishing inside the vehicle (painted center consoles & trim, entry areas, etc.).

To ensure that even more severe paint defects can be removed, this small and compact polisher is equipped with a 710 watt powerful motor. The constant speed electronics ensure a constant speed under varying loads. The blower airflow is directed to the surface through an opening right next to the polishing pad to cool it and also remove polishing dust.

The 5-meter cable and a continuous operation switch allow comfortable polishing work with maximum freedom of movement.

A suitable rod handle can be mounted on the left and right side, ergonomics is suitable for left and right handers.

The polishing result is a professional shine. For the exchangeable polishing pads in diameters of 30, 50 and 74 mm, we offer an optionally available ,18-piece, polishing sponge set in the accessories program.

The wide speed range allows polishing work from as low as 800 rpm. The motor speed can be adjusted in 6 steps between 800-2,700 rpm. A soft-start control function prevents loss of care products and ensures controlled acceleration.

The Dino KRAFTPAKET rotary polisher comes with three backing pads (30/50/74mm), 80mm extension adapter and a lockable canvas carrying case, with room for the extensive accessories and your favorite polish or sealant.

Polishing speed: 800-2.700 rpm
Speed settings: 6 (adjustable: 800 - 2.700 rpm.)
Power: 710W
Vibration: ah,P: 0,76 m/s2, K:1,5m/s2
Noise level: LwA: 89 dB(A) KwA: 3 dB / LpA: 78 dB(A) KpA: 3 dB
Power supply: 230V ~ 50Hz
Cable length: 5 meters
Material: impact resistant plastic housing
Connection thread for backing pad: M14
Backing pads: 30, 50, 74mm Ø with velcro
Weight: approx. 1.93 kg
Power plug: Type C (CEE 7/17) "contour" plug
Heat protection cap/impact protection cap