Büttner Solarset PowerPack Classic Power Plus I / II

More power in your mobile home. The ideal on-board power supply for motorhomes - as a supplement or in sole operation. The more powerful PowerPack CLASSIC POWER I and PowerPack CLASSIC POWER II sets are equipped with a BCB with respective output powers of 40A and 20A. They are suitable for motor homes for faster charging or when a little more battery capacity is required. The charging power can be throttled on the device. Besides the advantages of all BCB systems already mentioned, these devices are not only recommended for the extension of an existing charging system but also for use as sole central charging stations for self-assembly or van expansion. Optimum IUoU charge at 230V and also while driving. Feed parallel into the existing on-board network or with a direct connection to the starter battery as a sole basis. All battery types (wet, gel, AGM, LiFePO4) can be charged, including switchable common LiFePO4 batteries. Continuous at "Euro 5" and "Euro 6" charging is guaranteed. PowerPack CLASSIC POWER I and PowerPack CLASSIC POWER II are equipped with a MT 5000iQ battery computer and additionally with one (CLASSIC POWER I) or two solar modules (CLASSIC POWER I) MT-Black-Line, each with 160Wp.

Assembly:
If the BCB is used as the sole charging station, no high-load relay (HSG 100) is required. A high-voltage relay must be ordered for vehicles with a pre-integrated electronic block (EBL) or if the installed isolating relay is not freely accessible.

Features:

• 40/40/30 BCB
• +40 A / 30 A charging power 230 V
• 40 A (on demand /for duration) booster/drive mode
• IUoU with temperature control
• Battery type: wet/AGM/gel/LiFePO4g
• Long-term activation program with pulser function
• MT 5000IQ Battery Computer
• Battery capacity display in % and Ah; remaining time display; voltage board/start; time; date.
• 72-cell solar module

Scope of delivery

MT BCB 30/30 or MT BCB 40/40; MT 5000iQ; MT 110/160 or MT 220/230 MC; solar assembly material; BCB cable set; high overload relay