Berger Touring bus awning
Product details
Front wall with clear film window | Double covered zippers |
Entrance and side entrance can be opened out as a sun canopy |
Product description
The Berger Touring bus awning is suitable for vehicles with a rain gutter height of 180 - 220 cm. The overall height of the tent is 205 cm.
The tent is free-standing. The vehicle can therefore be easily driven away without having to dismantle the tent.
Poles:
3 fiberglass poles Ø 12.7 mm,
2 aluminum roof poles Ø 19 mm,
2 steel pitching poles Ø 16 mm,
1 steel airlock pole Ø 19 mm.
Front wall:
- Entrance can be rolled up and opened as a sun canopy
- Clear film window (can be closed opaque from the inside)
Side walls:
- Left and right side wall with 1/2 mosquito gauze and 1/2 clear film window (can be closed opaque from the outside)
- Right side wall with entrance (can be rolled up and opened as a sun canopy)
Rear wall:
- Can be rolled away to the side (with zipper), incl. windbreak
- Connecting airlock with hemstitch for airlock pole
general features:
- Tape-sealed seams
- Double covered zippers
- Roof poles for more stability
Features
Type of caravan and mobile home awning | Camper awning |
Inflatable | - |
Colour | anthracite |
Frame | Fiberglass, aluminum, steel |
Weight | 12,5 kg |
Installed height (min.-max.) | 180 - 220 cm |
Dimensions (WxD) | 315 x 345 cm |
Pack size (LxWxH) | 74 x 23 x 23 cm |
Material | 100 % polyester, polyurethane-coated |
Water column | 3000 mm |
ean | 4036231081446 |
Legal information
Manufacturer information
Fritz Berger GmbH
Dr. Matthias Herfeld
Fritz-Berger-Strasse 1
92318 Neumarkt
Germany
customer-service@berger-camping.com
Product tests (1)
Article characteristics
Number of persons
Suitable for sleeping and living for 2 persons
Double covered zippers
Provide additional wind and rain protection at entrances and windows.
Lightweight fiberglass frame
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments...
Read more
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments are connected by a rubber band, thus facilitating assembly Advantage: weight saving.
Taped seams
An adhesive tape provides additional protection for all seams and prevents the...
Read more
An adhesive tape provides additional protection for all seams and prevents the penetration of moisture.
Mosquitogaze
Protection from insects and other small animals. Also serves for air circulation.
Water column 3.000 mm
The water column provides information about the material tightness. To...
Read more
The water column provides information about the material tightness. To determine the millimetre value, 10 cm of fabric is stretched under a measuring cylinder and the cylinder is filled with water from above. The limit value at which water droplets press through the material is the maximum water column. In Germany, a tent outer material is considered waterproof from 1500 mm.
Camper
Suitable for camping buses.