Product details
firmly sewn-in bottom | Entrance can be set up as a sun canopy |
Window flaps can be rolled up |
Product description
Free-standing and inflatable bus awning for vehicles with a rain gutter height of 180 - 220 cm. The total height is 240 cm.
Piping diameter: 7 mm
Material: 100 % polyester, polyurethane-coated, tape-sealed seams. Floor: 100 % polyethylene.
Water column: 3000 mm.
Poles:
- 3 air tubes Ø 10 cm
- 2 air tubes Ø 8 cm - roof stabilization
- 2 steel stabilizing rods Ø 19 mm
- 1 steel airlock rod Ø 16 mm
Front wall:
- left: with large window (1/3 mosquito gauze, 2/3 foil, can be closed opaque from the outside)
- right: entrance with mosquito gauze door can be closed with a zipper
- Entrance can be opened out as a sun canopy
Side walls:
- left side wall with lockable permanent ventilation
- right side with large entrance and transparent window (can also be opened as a sun canopy)
Rear wall:
- Door to vehicle can be rolled upwards (using zipper), incl. windbreak and mosquito gauze
general features:
- tape-sealed seams
- double covered zippers
- firmly sewn-in groundsheet
- incl. roof stabilization
- mobile airlock to the vehicle, is tensioned over the roof
Scope of delivery: Tent skin, 3 air tubes Ø 10 cm, 2 air tubes Ø 8 cm - roof stabilization, 2 steel poles, 1 airlock pole, tensioning material (100 % polyester), double-stroke air pump, stuff sack (100 % polyester).
Features
Type of caravan and mobile home awning | Camper awning |
Inflatable | |
Sewn-in base | |
Vehicle type Inflatable awning | Camper awning |
Colour | anthracite |
Frame | inflatable |
Weight | 21,5 kg |
Installed height (min.-max.) | 180 - 220 cm |
Dimensions (WxD) | 300 x 500 cm |
Pack size (LxWxH) | 70 x 35 x 35 cm |
Article characteristics
Number of persons
Suitable for sleeping and living for 4 people
inflatable
Frame hoses for inflation.
Permanent ventilation
Ensures good air circulation, reduced condensation and a pleasant indoor...
Read more
Ensures good air circulation, reduced condensation and a pleasant indoor climate. Integrated differently depending on the awning model.
Double covered zippers
Provide additional wind and rain protection at entrances and windows.
Sewn in bottom
Floor is firmly connected to the flysheet. Best possible comfort and protection...
Read more
Floor is firmly connected to the flysheet. Best possible comfort and protection against draughts, insects, dirt and moisture. Also makes it easier to pitch the tent.
Taped seams
An adhesive tape provides additional protection for all seams and prevents the...
Read more
An adhesive tape provides additional protection for all seams and prevents the penetration of moisture.
Mosquitogaze
Protection from insects and other small animals. Also serves for air circulation.
Power cable entry (E-Port)
Enables safe power supply with firmly sewn-in bottom. Can be closed by means of a zipper
Water column 3.000 mm
The water column provides information about the material tightness. To...
Read more
The water column provides information about the material tightness. To determine the millimetre value, 10 cm of fabric is stretched under a measuring cylinder and the cylinder is filled with water from above. The limit value at which water droplets press through the material is the maximum water column. In Germany, a tent outer material is considered waterproof from 1500 mm.
Camper
Suitable for camping buses.