Product details
Quick assembly and disassembly thanks to air linkage | Freestanding |
UV protection 50+ | Including storm bracing |
Additional stowage and living space for minicampers |
Product description
Liberta-L Rear Bus - inflatable rear bus tent with maximum comfort!
You are travelling with your bus and are looking for an awning that gives you maximum flexibility at your holiday destination? Then the Liberta-L Rear is the right choice for vehicles with a height of 180-205 cm! The rear tent Liberta-L Rear is an inflatable, free-standing awning with crossed poles. Thanks to the air poles, the rear tent can be erected quickly and easily. To attach it to the vehicle, simply pull the connecting sluice over the rear of the vehicle and fasten it with the tensioning strap. This enables universal use on different bus models (please note the mounting height).
Equipment
Front wall:
- Entrance with mosquito gauze doors closable by zipper
- Clear film windows for optimal light supply (can be closed opaque from the inside)
- incl. E-Port power cable duct with zipper
Side walls:
- left and right side wall with clear film window (can be closed opaque from inside)
- right side wall with entrance (can be rolled up or opened as a sun canopy)
Back wall:
- can be rolled away to the side (by means of a zipper), incl. windbreak
- Connection lock with additional entrance incl. bracing belts
General equipment:
- tape-sealed seams
- inflatable pole
- reinforced storm bracing in the entrance area
- double covered zippers
- firmly sewn-in tent floor for additional comfort
- incl. lamp suspension
Scope of delivery:
- Tent skin
- Linkage
- Guying material
- Packing bag (100% polyester)
- Air Pump
The sleeping cabin is not part of the scope of delivery and must be purchased separately.
Features
Type of caravan and mobile home awning | Camper awning |
Type of caravan and mobile home awning | Rear tent |
Inflatable | |
Sewn-in base | |
Scope of delivery | Tent skin, poles, bracing material (100% polyester), packing bag (100% polyester), air pump |
Vehicle type Inflatable awning | Camper awning |
Colour | black / grey |
Frame | 2 air hoses Ø 10 cm, 2 steel rods Ø 16 mm |
Weight | 17,85 kg |
Material | 100% polyester (68D), polyurethane coated, bottom: 100% polyethylene (waterproof) |
Water column | 3000 mm |
Dimensions (WxD) | 305 x 370 cm |
Pack size (LxWxH) | 75 x 40 x 39 cm |
ean | 4036231070938 |
Legal information
Manufacturer information
Fritz Berger GmbH
Dr. Matthias Herfeld
Fritz-Berger-Strasse 1
92318 Neumarkt
Germany
customer-service@berger-camping.com
Article characteristics
inflatable
Frame hoses for inflation.
Double covered zippers
Provide additional wind and rain protection at entrances and windows.
Sewn in bottom
Floor is firmly connected to the flysheet. Best possible comfort and protection...
Read more
Floor is firmly connected to the flysheet. Best possible comfort and protection against draughts, insects, dirt and moisture. Also makes it easier to pitch the tent.
Taped seams
An adhesive tape provides additional protection for all seams and prevents the...
Read more
An adhesive tape provides additional protection for all seams and prevents the penetration of moisture.
Mosquitogaze
Protection from insects and other small animals. Also serves for air circulation.
Power cable entry (E-Port)
Enables safe power supply with firmly sewn-in bottom. Can be closed by means of a zipper
Water column 3.000 mm
The water column provides information about the material tightness. To...
Read more
The water column provides information about the material tightness. To determine the millimetre value, 10 cm of fabric is stretched under a measuring cylinder and the cylinder is filled with water from above. The limit value at which water droplets press through the material is the maximum water column. In Germany, a tent outer material is considered waterproof from 1500 mm.
Camper
Suitable for camping buses.