Autoterm AIR 2D heating power diesel air heater 2 KW 12 VAutoterm AIR 2D heating power diesel air heater 2 KW 24 V
Availability:
Available in up to 3 weeks
Availability:
Available in 3-5 working days
Only small number of pieces available
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| Small and compact | Ideal for smaller vehicles and boats |
| Fast response time |
Product description
Autoterm Air 2D (formerly Planar 2D) is the smallest and most compact diesel air heater in Autoterm's product range. With a heating power of 2KW and a fast response time, it is ideal for smaller vehicles (e.g. VW T5/T6; Renault Traffic; etc.) and boats (up to approx. 10m in length)
Per hour the Autoterm Air 2D generates a warm air volume of up to 75m³, and consumes only max. 0.24 liters of diesel
The power consumption is max. 29W/hour
12V and 24V version available.
Parking heaters (AIR) are easy to install and provide comfortable warmth in mobile interiors (seating/sleeping and cargo compartments). No matter if camper, van, truck, bus, boat, yacht or train - a high comfort gain is included. The Autoterm air heaters can therefore be used in many applications
It is possible to use the heater in fresh air or recirculated air mode. Even in extreme environments with extreme temperatures down to -45°C/-49°F, heater operation is not a problem.
The standard installation kit is included. This also includes the quiet fuel pump TH11 and an integrated height kit. This allows the Autoterm Air 2D to be used at altitudes of up to 2,500 meters
The brushless induction motor ensures a long service life with a low noise level. Due to the very robust technology "Made in Russia", operation in extremely cold regions is possible without any problems (tested in Siberia). The parking heaters are manufactured without exception for the European market, and have an ECE test mark, so the parking heaters can be installed without registration.
The hole pattern and the mounting points correspond to the manufacturers Eberspächer and Webasto. This makes it very easy to replace the parking heater with a financially much more interesting Autoterm parking heater.
A 60mm - warm air system can be connected to the Autoterm Air 2D.
Technical data:
Different control units allow to control the heating directly in the vehicle or with a radio remote control. From greater distances, control can be performed via the QStart modem (GSM/LTE modem, mobile network) in conjunction with a smartphone (IOS or Android). A smartphone app "Autoterm Control" for IOS or Android supports this function. The app can be downloaded to the smartphone.
Taking into account your own ideas, the following operating solutions can be selected:
Per hour the Autoterm Air 2D generates a warm air volume of up to 75m³, and consumes only max. 0.24 liters of diesel
The power consumption is max. 29W/hour
12V and 24V version available.
Parking heaters (AIR) are easy to install and provide comfortable warmth in mobile interiors (seating/sleeping and cargo compartments). No matter if camper, van, truck, bus, boat, yacht or train - a high comfort gain is included. The Autoterm air heaters can therefore be used in many applications
It is possible to use the heater in fresh air or recirculated air mode. Even in extreme environments with extreme temperatures down to -45°C/-49°F, heater operation is not a problem.
The standard installation kit is included. This also includes the quiet fuel pump TH11 and an integrated height kit. This allows the Autoterm Air 2D to be used at altitudes of up to 2,500 meters
The brushless induction motor ensures a long service life with a low noise level. Due to the very robust technology "Made in Russia", operation in extremely cold regions is possible without any problems (tested in Siberia). The parking heaters are manufactured without exception for the European market, and have an ECE test mark, so the parking heaters can be installed without registration.
The hole pattern and the mounting points correspond to the manufacturers Eberspächer and Webasto. This makes it very easy to replace the parking heater with a financially much more interesting Autoterm parking heater.
A 60mm - warm air system can be connected to the Autoterm Air 2D.
Technical data:
- Voltage: 12V or 24V
- Fuel type: Diesel
- Maximum heater power: 2 KW
- Heater Autoterm Air 2D 2KW - version, with integrated altitude kit
- Electronic components: Wiring harness for heater, control panel cable, power cable for fuel pump
- Fuel components: silent fuel pump TH11, rubber bracket for fuel pump, 5,5m fuel line PA 11-5,3?1,65, connectors for fuel line, fuel tank drain pipe
- Exhaust components: 1m exhaust pipe 24mm 2-ply, exhaust pipe - insulating hose 28*5*450 mm, exhaust silencer 24mm, end piece for exhaust pipe
- Other components: Air intake hose for the combustion chamber with integrated silencer, screws, nuts, clamps, installation and operating instructions in German
Different control units allow to control the heating directly in the vehicle or with a radio remote control. From greater distances, control can be performed via the QStart modem (GSM/LTE modem, mobile network) in conjunction with a smartphone (IOS or Android). A smartphone app "Autoterm Control" for IOS or Android supports this function. The app can be downloaded to the smartphone.
Taking into account your own ideas, the following operating solutions can be selected:
- Operating unit PU-5 / rotary control
- Operating unit PU-27 / OLED display / timer
- Operating unit Comfort Control / modern design / large display with backlight / timer
- Operating unit radio remote control / range approx. 100m
- Control unit QStart Modem / smartphone app / only in combination with one of the above mentioned control units
Features
| Type of hot air system | Hot air system |
| Design | 12V |
| Recommended vehicle length | 10 m |
| Heat output heat pump | 2 kW |
| ean | 4054354105214 |
| Manufacturer Article No. | 68990 |
Features
| Type of hot air system | Hot air system |
| Design | 24V |
| Recommended vehicle length | 10 m |
| Heat output heat pump | 2 kW |
| ean | 4054354105221 |
| Manufacturer Article No. | 69023 |
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
