Xzent Reversing Camera X-RVC290-MK2 for Fiat Ducato 3 Chassis

The XZENT X-RVC290-MK2 reversing camera has been specially developed for motorhomes based on the FIAT Ducato III chassis, including the other variants of this vehicle type.

For the best possible overview behind the motorhome, the X-RVC290-MK2 offers a horizontal viewing angle of 125°. The special feature of this camera is the physical integration of the camera into the third brake light of the Ducato vehicles.

The X-RVC290-MK2 is compatible with a wide range of aftermarket moniceivers and navigation systems as well as the infotainers of the XZENT series.

The details

• vehicle-specific, high-resolution brake light reversing camera for FIAT Ducato III vehicles and analog type variants
• system design that integrates into the original Ducato brake light (homologation-compliant)
• high-quality CMOS image sensor with low power consumption
• detailed, high-contrast image even in twilight conditions
• plastic housing with stainless steel mounting bolts and screws
• detachable system cable with 0.30 m + 11 m length

Technical details

• camera system 0.33" / 8.38 mm PC4089 CMOS sensor
• lens focal length f2
• tV system NTSC / 60 fps
• viewing angle 160° (D) / 125° (H) / 100° (V)
• native sensor resolution 728 x 488 pixels (native SOC pixels 756 x 504 H x V)
• output signal resolution > 550 TV lines
• frame rate 60 fields/sec.
• signal-to-noise ratio > 46.5 dB
• light sensitivity 0.5 Lux/IR On
• video output 1.0 Vp - p (+/- 0.2 V), 75 Ohm, CVBS Cinch
• white balance automatic
• exposure compensation automatic
• dynamic range 60.7 dB
• brightness compensation automatic
• synchronization automatic
• power supply DC12V (9-16 V DC)
• current consumption 40 mA +/- 10 mA (@ DC12V) / 480 mW
• protection class IP68
• operating temperature -20° to +70° C