Votronic fully automatic charger VAC 1215 F 3A with temperature sensor 12 V / 15 AVotronic fully automatic charger VAC 1230 F 3A with temperature sensor 12 V / 30 AVotronic fully automatic charger VAC 2416 F 3A with temperature sensor 24 V / 16 A
Availability:
Available in up to 3 weeks
Availability:
Available in up to 3 weeks
Availability:
Sold out
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| Specially designed for fire engines | Temperature sensor 825 in scope of delivery |
| Automatic battery regeneration | Electronics moisture protected |
Product description
The VAC-F charger series is designed for vehicle installation and meets the requirements of the FNFW in the current fire department standard DIN 14679 for charging auxiliary and starter batteries in emergency vehicles.
Votronic chargers of the "VAC F" series are characterized by their compact design, low weight (high-frequency switching power supply, switch mode technology) and full charging power even with large deviations in the mains supply (under/overvoltage, sine wave, frequency).
The intelligent microprocessor charging control with "IU1oU2oU3" charging programs (constant current - constant voltage) and dynamic charging time calculation automatically ensures fast and gentle full charging as well as subsequent 100% charge retention of the connected batteries from any initial state of charge and always enables the simultaneous supply of parallel-connected 12 V (24 V) consumers or the charging of very large batteries (depending on the charging mode). charging very large batteries (depending on the application).
The built-in charging current distributor enables the full charging current to be supplied to the main charging outputs I and II, so that the vehicle starter battery, for example, can be recharged in a short time.
Battery outputs
Votronic chargers of the "VAC F" series are characterized by their compact design, low weight (high-frequency switching power supply, switch mode technology) and full charging power even with large deviations in the mains supply (under/overvoltage, sine wave, frequency).
The intelligent microprocessor charging control with "IU1oU2oU3" charging programs (constant current - constant voltage) and dynamic charging time calculation automatically ensures fast and gentle full charging as well as subsequent 100% charge retention of the connected batteries from any initial state of charge and always enables the simultaneous supply of parallel-connected 12 V (24 V) consumers or the charging of very large batteries (depending on the charging mode). charging very large batteries (depending on the application).
The built-in charging current distributor enables the full charging current to be supplied to the main charging outputs I and II, so that the vehicle starter battery, for example, can be recharged in a short time.
Battery outputs
- Main charging output battery I (master), depending on battery type 5 adjustable charging programs (see charging programs)
- Battery II main charging output, adjustable charging programs depending on type
- Control output "+86" (start inhibit)
- "MOTOR": Charging program for lead-acid/wet batteries, characteristic curve IU1oU2oU3:
Characteristic similar to alternator/generator for mobile use (acid stratification), with particularly low maintenance (battery gassing, water consumption). Charging and charge retention of starter batteries in emergency vehicles, in accordance with a conventional proposal from the Fire Service Standards Committee (FNFW). For conventional standard starter batteries, starter batteries "Absolutely maintenance-free", "Maintenance-free according to EN", "Maintenance-free according to DIN", "Maintenance-free", "Low maintenance". - "L": Closed acid/wet batteries with water consumption: L = low according to DIN EN 50342-1, characteristic curve IU1oU2oU3:
Characteristic curve with medium U1 level for acid batteries in vehicle built-in or external chargers with fixed location. - "VL": Closed acid/wet batteries with water consumption: VL = very low according to DIN EN 50342-1, characteristic curve IU1oU2oU3:
Characteristic curve with high U1 level for acid batteries in vehicle built-in or external chargers with fixed location. - "Fleece": Sealed batteries (VRLA) with AGM/fleece technology: Characteristic curve IU1oU2oU3:
Characteristic curve for AGM batteries in vehicle built-in or external chargers with a fixed location. - "Gel": Sealed batteries (VRLA) with gel technology: Characteristic curve IU1oU2oU3:
Characteristic curve for gel batteries for vehicle-mounted or external chargers with a fixed location
- Battery type adjustable: Gel, AGM, acid
- Automatic battery regeneration
- Mains adapter function (battery change)
- Man. Charging start when battery is deeply discharged
- Remote control/display connection
- Charging current distributor, switchable Start
- Switching output Motor start lock
- Temperature compensation
- Temperature sensor(s) 825 included: 1
- Electronics protected against moisture
- BR: Automatic battery regeneration
- DC: Power supply function (battery replacement)
- FB: Remote control/display connection
- LV: Charging current distributor for one or more batteries
- TK: Temperature compensation TS Temperature sensor included in scope of delivery
- Electronics protected against moisture
- Nominal operating voltage (full charging capacity): 230 V, 45 - 65 Hz
- Operating voltage range 85 - 265 V
- Operating voltage range full charging power 190 - 265 V
- Max. Power consumption (AC): 240 W / 490 W / 510 W (depending on version)
- Nominal battery voltage: 12 V / 12 V / 24 V (depending on version)
- Battery capacity I or I+II (total) according to DIN 14679: 30 Ah-75 Ah / 50 Ah-150 Ah / 30 Ah-80 Ah (depending on version)
- Battery capacity I or I+II (total) according to DIN 14679 for breaks >24 h: 30 Ah-150 Ah / 50 Ah-300 Ah / 30 Ah-160 Ah (depending on version)
- Sinusoidal power factor correction (CosPhi = 1): yes
- Device installation position: any
- Temperature range: -20 to +45 °C
- Protection class/protection type: I / IP2X
- Ambient conditions, humidity: max. 95 % room humidity, non-condensing
- When vehicles are not in use for >24 hours, in accordance with DIN 14679
- Mains cable
- 1 temperature sensor
- Operating instructions
Features
| Type battery | Charger |
| Weight | 1250 g |
| Charging current | 15 A |
| Battery capacity | 30 - 75 (150) Ah |
| Input voltage | 190 - 265 (full charging capacity) V |
| Design | 12 V / 15 A |
| Dimensions (LxWxH) | 230 x 139 x 74 mm |
| Model | VAC-F version A |
| Output | 240 W |
| ean | 4250683615558 |
| Manufacturer Article No. | 0470 |
Features
| Type battery | Charger |
| Weight | 1350 g |
| Charging current | 30 A |
| Battery capacity | 50 - 150 (300) Ah |
| Input voltage | 190 - 265 (full charging capacity) V |
| Design | 12 V / 30 A |
| Dimensions (LxWxH) | 230 x 139 x 74 mm |
| Model | VAC-F version A |
| Output | 490 W |
| ean | 4250683615442 |
| Manufacturer Article No. | 0476 |
Features
| Type battery | Charger |
| Weight | 1400 g |
| Charging current | 16 A |
| Battery capacity | 30...80 (160) Ah |
| Input voltage | 190 - 265 (full charging capacity) V |
| Design | 24 V / 16 A |
| Dimensions (LxWxH) | 230 x 139 x 74 mm |
| Model | VAC-F version A |
| Output | 510 W |
| ean | 4250683615411 |
| Manufacturer Article No. | 0494 |
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
