Swiss Piranha RT120 tent peg red 12 cm singleSwiss Piranha RT120 tent peg red 12 cm set of 10Swiss Piranha RT120 tent peg red 12 cm set of 10 in bag
Availability:
Sold out
Availability:
Sold out
Availability:
Available in 3-5 working days
Only small number of pieces available
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| Very light | Secure hold |
| High performance plastic | Shockproof |
| Simple hammering | Recyclable |
Product description
Weighing only 5.9 g at 12 cm long, the SwissPiranha RT120 is not only interesting for lightweight fans, but thanks to its flat profile it is an extremely safe tent peg. The RT120 tent peg is the smaller and lighter version of our popular RT150 and convinces just as with all the performance of the original!
Available individually or in packs of 10.
Redtrout. Extremely light and super safe
These tent pegs from SwissPiranha are made from the high-performance plastic PiranhaNT and offer distinct advantages over conventional pegs: they are ultra-light, shock-resistant and super secure. Their tapered shape makes them easy to hammer in, while an x-shaped cross-section with a sawtooth profile ensures a secure hold in a wide variety of soils. The flat head compresses the ground and maximizes holding power. Notches reliably hold the tent lines in place and provide the best anchoring. The high-performance PiranhaNT plastic is forgiving of hammering with a hammer, axe or stone - there are no sharp edges that damage the tent fabric. Since SwissPiranha tent pegs are completely sunk into the ground at a 90° angle, the risk of injury is reduced to zero. Dirty pegs can be cleaned in the dishwasher. SwissPiranha also scores in environmental friendliness: production is in Switzerland and its high-performance plastic requires up to 13 times less energy than pegs made of aluminum. Bent RT pegs can be restored to their original shape after 5 minutes at 160°C in the oven. Worn-out SwissPiranha pegs can be recycled.
The SwissPiranha RT120 is suitable for both hard and soft floors and can be used for small to medium tents, tarps, picnic blankets, cover sheets, etc.
Details
Available individually or in packs of 10.
Redtrout. Extremely light and super safe
These tent pegs from SwissPiranha are made from the high-performance plastic PiranhaNT and offer distinct advantages over conventional pegs: they are ultra-light, shock-resistant and super secure. Their tapered shape makes them easy to hammer in, while an x-shaped cross-section with a sawtooth profile ensures a secure hold in a wide variety of soils. The flat head compresses the ground and maximizes holding power. Notches reliably hold the tent lines in place and provide the best anchoring. The high-performance PiranhaNT plastic is forgiving of hammering with a hammer, axe or stone - there are no sharp edges that damage the tent fabric. Since SwissPiranha tent pegs are completely sunk into the ground at a 90° angle, the risk of injury is reduced to zero. Dirty pegs can be cleaned in the dishwasher. SwissPiranha also scores in environmental friendliness: production is in Switzerland and its high-performance plastic requires up to 13 times less energy than pegs made of aluminum. Bent RT pegs can be restored to their original shape after 5 minutes at 160°C in the oven. Worn-out SwissPiranha pegs can be recycled.
The SwissPiranha RT120 is suitable for both hard and soft floors and can be used for small to medium tents, tarps, picnic blankets, cover sheets, etc.
Details
- very good weight/performance ratio
- Soil is additionally compacted → higher tear-out force
- flat profile - no stumbling, no risk of injury
- very light & impact resistant
- bent pegs can be formed back (approx. 5 min. in the oven at 160 °C)
- dishwasher safe - easy cleaning
- up to 13 times less energy needed for production and recycling
- 100 % Swiss quality
- Weight: 5.9 g / 0.21 oz per piece
- Diameter (head): 19 mm / 0.75 in
- suitable for: small to medium tents and tarps, ultra-light backpacking
- Soils: soft / medium / hard
Features
| Type of peg | Hammer-in tent peg |
| Floor | mixed soils |
| Floor | hard floors |
| Floor | soft floors |
| Colour | red |
| Weight | 5,9 g |
| Length | 12 cm |
| Material | Piranha NT |
| Design | Single |
| ean | 7640106450236 |
| Manufacturer Article No. | 853791-RT120 |
Features
| Type of peg | Hammer-in tent peg |
| Floor | mixed soils |
| Floor | hard floors |
| Floor | soft floors |
| Colour | red |
| Weight | 5,9 g |
| Length | 12 cm |
| Material | Piranha NT |
| Design | set of 10 |
| ean | 7640106450250 |
| Manufacturer Article No. | 853791-10RT120 |
Features
| Type of peg | Hammer-in tent peg |
| Floor | mixed soils |
| Floor | hard floors |
| Floor | soft floors |
| Colour | red |
| Weight | 5,9 g |
| Length | 12 cm |
| Material | Piranha NT |
| Design | set of 10 in bag |
| ean | 7640106450519 |
| Manufacturer Article No. | 853792-10RT120 |
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
