Product description
Separett Tiny is a separation toilet designed specifically for Tiny Homes and other small spaces, such as camper vans, caravans, boats, gazebos, etc.. All that is needed for installation is a 12 V or 110-240 V power connection and a 50 mm pipe for ventilation of the toilet.
Optimal for smaller spaces
Tiny is our newest member of the Separett family. The simple and flexible design of the Separett Tiny is the result of many years of development of separation toilets and offers the perfect fit for rooms with limited space.
Closed system
This model of the Tiny series contains both liquid waste and solid excreta in two separate containers. If the toilet is used in a permanent residence with two people, the solid waste collection canister must be emptied once a week. The urine canister must be emptied 2-3 times per week. Thanks to the sensor-based level indicator of the urine canister, the Separett logo on the toilet lights up red when it needs to be emptied.
Hygienic and odorless
The Tiny toilet can be relied on thanks to its high level of operational reliability, and its installation is child's play. The faint odor that arises despite urine separation is led out by the fan and a better indoor climate is created by constant air circulation. At the same time, the fan works quietly and effectively. The maximum effectiveness of the fan is achieved with continuous use.
Privacy screen
The privacy screen hides the solid excreta in the tank and is automatically pushed open when you sit down to go to the toilet. This way, you will only see the waste products when you empty the tank.
User instructions
Always sit down when you use the toilet. Position yourself slightly further back than you normally would so that the urine can be separated from the solid excreta.
The privacy screen will automatically slide open as soon as you sit down.
The toilet paper goes in the same container as the solid waste.
How it works
The Tiny separation toilet separates urine from solid waste products and is equipped with a fan that extracts moisture and air. This creates an odorless environment. This model of the Tiny series collects both urine and solid excreta products inside the toilet, with the solid waste ending up in a compostable organic waste bag made of corn starch. The urine is collected in a canister. If the toilet is used permanently in a household with two people, the solid waste container must be emptied once a week, and the urine canister 2-3 times a week. The urine canister is equipped with a sensor-based level indicator that causes the separet logo on the toilet to light up red when it is time for emptying.
Placement of the toilet
Separett Tiny works equally well in cold and warm rooms, regardless of the room temperature. The only requirements are that the urine can be drained and a ventilation pipe can be installed.
The toilet must be placed on the floor against the wall. For extra stability, it should be fixed either in the floor, in the wall, or both.
Drill holes as described in the installation template
The enclosed installation template shows you the possible options for installing the urine drain and vent pipes through the wall behind the toilet or through the floor. These options allow installation without visible pipes.
Installation of the ventilation pipe
The toilet is designed for 50 mm pipes (outer diameter). For optimal functioning, we recommend that you use Separett's installation kit, which includes pipes and connections in the correct dimensions. Separett Tiny can be installed with up to 5 m of ventilation pipes and two 90° bends. Ventilation can be through a wall, the floor, the roof or a suitable side of the house to the outside. If there is already a ventilation pipe from a previous toilet installation, the toilet can be connected to it,
provided that the existing pipe is not smaller than 50 mm and meets the requirements. If you need a longer pipe that exceeds the above recommendations, you can install an extra vent (part number 13008). The toilet comes with a connector to connect the 40 cm long 50 mm pipe to a 1.5 inch pipe.
Installation of the urine drain
The toilet is supplied with a 2 m urine hose. To connect this to the toilet, use the straight connection or the 90° connection. As with the installation of the vent pipes, it is possible to attach the urine hose so that no pipe is visible. This is achieved by angling the 90° connection down or using the straight connection.
Details:
Filter by function Battery/solar operation (12V battery cable not included)
Possible applications Leisure house without power supply
Capacity Unlimited - emptying needs depend on the number of users
Product weight 12 kg
Packing weight 13 kg
Max. User weight 150 kg
Product dimensions Length 49.7 cm | Width 39.8 cm | Height 47 cm
Seat height 44-45 cm
Package size Length 52.5 cm | Width 40.5 cm | Height 50 cm
Material Recyclable high gloss polypropylene
Emptying interval for 4 users (urine) Every other day
Emptying interval for 4 users (solids) 2 times a week
Volume - inner tank (urine) 7.5 l
Energy consumption 0,04 kWh/ day
Connection battery cable 1,55 m or power supply 110-230 V / 12 V (12V battery cable not included)
Total power 12 V / 1,6 W / 133 mA
Voltage 12V
Ventilation duct/ tube Ventilation tube Ø50 mm
Noise level during operation <30 dB(A)
Included in delivery
Installation manual
Universal adapter for 110-240 V use
1 x waste container with lid
1 x urine canister
Ø 50 mm ventilation pipe, 40 cm
Adapter Ø 50 mm to 1,5 inch
Ventilation grille with insect net
Ventilation hood
Holder for drain cleaner tablet
Installation template
Screws for wall/floor
Sample waste bag, compostable
Sample organic drain cleaner
Sample Absorb - absorbent cloth
Maintenance and cleaning
Separett Tiny should be cleaned with a gentle, environmentally friendly detergent. The toilet is made of dense high-gloss polypropylene, which can be scratched by
can be scratched by aggressive cleaning. We recommend using our Bio-Drain Cleaner to reduce the formation of urine stones in the urine canister.
The fan must run continuously to prevent odors in the bathroom. Flush the filter in the ventilation duct with water regularly to ensure good ventilation.
Features
Weight | 8,5 kg |
Dimensions (LxWxH) | 49,7 x 39,8 x 47 cm |
Seat height | 45 cm |
ean | 7393553118999 |
Manufacturer Article No. | 1271-02 |
Legal information
General Safety Information
Manufacturer information
Separett GmbH
Vahrenwalder Str. 205
30165 Hannover
Germany
infode@separett.com