Product details
One-Go Inflation Technology | Canopy on the front and back |
Light and compact | All three sides can be opened completely |
Outwell HookTrack System | Aerodynamic storm protection |
Air rods and fiberglass rods | Outwell HookTrack System |
Freestanding |
Product description
The inflatable Bremburg Air is a compact bus awning that is erected sideways and thus parallel to the bus. The assembly succeeds in a few minutes and the air hoses are inflated quickly only via a valve with the supplied pump. All three sides can be opened completely and have an additional insect net door, which can also be closed at the bottom via zippers with the continuous floor. In addition, the front and rear sides are protected by a rain canopy, allowing you to choose your favorite exit depending on space and weather conditions, also super usable in a bus rear kitchen. In the connection lock, which connects the tent with the bus over the double keder profile or lines, are two further doors, which offer you a good entrance to the bus or tent in bad weather. An additional groundsheet including wind skirt is included for this purpose. A sleeping cabin for 2 persons is optionally available and can be hooked up in the evening in a few seconds. Of course, this bus awning can also be completely closed and it can be left at the site.
Features
Type of caravan and mobile home awning | Camper awning |
Inflatable | |
Vehicle type Inflatable awning | Camper awning |
Frame | Duratec Fiberglass 9.5 mm |
Weight | 21,1 kg |
Material | Outtex 4 Select Polyester |
Water column | 4000 mm |
Sewn-in base | |
Colour | Black / Grey |
Installed height (min.-max.) | 175 - 200 cm |
Dimensions (WxD) | 260 x 320 cm |
Pack size (LxWxH) | 72 x 42 x 42 cm |
ean | 5709388119193 |
Manufacturer Article No. | 111243 |
GPSR - Legal information
Herstellerinformationen
Oase Outdoors ApS
Kornvej 9
7323 Give
Denmark
kha@oase-outdoors.dk
Article characteristics
Water column 4,000 mm
The water column provides information about the material tightness. To...
Read more
The water column provides information about the material tightness. To determine the millimetre value, 10 cm of fabric is stretched under a measuring cylinder and the cylinder is filled with water from above. The limit value at which water droplets press through the material is the maximum water column. In Germany, a tent outer material is considered waterproof from 1500 mm.
inflatable
Frame hoses for inflation.
Double covered zippers
Provide additional wind and rain protection at entrances and windows.
Sewn in bottom
Floor is firmly connected to the flysheet. Best possible comfort and protection...
Read more
Floor is firmly connected to the flysheet. Best possible comfort and protection against draughts, insects, dirt and moisture. Also makes it easier to pitch the tent.
Lightweight fiberglass frame
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments...
Read more
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments are connected by a rubber band, thus facilitating assembly Advantage: weight saving.
Taped seams
An adhesive tape provides additional protection for all seams and prevents the...
Read more
An adhesive tape provides additional protection for all seams and prevents the penetration of moisture.
Mosquitogaze
Protection from insects and other small animals. Also serves for air circulation.
Power cable entry (E-Port)
Enables safe power supply with firmly sewn-in bottom. Can be closed by means of a zipper
Camper
Suitable for camping buses.