MultiMan PuroChlor fresh water disinfection

MultiMan PuroChlor sanitizes and regenerates drinking water layers in older caravans and motor homes, sailing and motor yachts!

Use MultiSil PuroChlor safely. Always read the label and product information before use.

Workflow for the sanitation of the drinking water system

Cleaning:
First remove biofilms in tank and pipes with MultiNox SchleimEx and rinse with water.

Disinfection:
Turn off the boiler. Fill a clean container with drinking water of approx. ¼ of the tank capacity, depending on the tank size. The quantity must be sufficient for filling the boiler and the pipes. Sprinkle the appropriate amount of MultiSil PuroChlor into the drinking water while stirring so that it does not clump.

Fill this concentrated disinfection solution into the drinking water tank via the filler neck. now open each water tap individually so that MultiSil PuroChlor reaches each line. Now fill the tank completely with drinking water and allow MultiSil PuroChlor to act for 4 - 6 hours to kill the biofilms. Then drain the system through each line and rinse with plenty of potable water.

Regeneration:
Flush hoses as recommended with MultiNox KalkEx to remove lime scale and bad odor and prevent Legionella growth.

Repeat procedure for stubborn deposits.

Details

• Recommended (for 1000 liters): for tanks from 100 l - 1.000 l
• Recommended (for 2500 liters): for tanks from 100 l - 2.500 l