Availability:
Available in 3-5 working days
Product details
Class D amplifier | High and low pass filters |
Aluminum housing for optimal heat dissipation |
Product description
High level inputs and automatic switch on
As an alternative to operation via RCA cable preamplifier input, the amplifiers of the XH series can also be connected directly to the high level outputs of an existing car radio. As soon as the signal obtained in this way is present, the amplifier switches on automatically and is therefore not dependent on its own control line for switching on.
Hi-Res Audio
The new power amplifiers of the XH series are capable of reproducing frequencies in the range above the otherwise usual 20kHz, thus also reproducing high-resolution audio data in the full bandwidth and with all details. In combination with a particularly low S/N level, high-quality recordings can be reproduced at an impressive level with the XH series.
Details
As an alternative to operation via RCA cable preamplifier input, the amplifiers of the XH series can also be connected directly to the high level outputs of an existing car radio. As soon as the signal obtained in this way is present, the amplifier switches on automatically and is therefore not dependent on its own control line for switching on.
Hi-Res Audio
The new power amplifiers of the XH series are capable of reproducing frequencies in the range above the otherwise usual 20kHz, thus also reproducing high-resolution audio data in the full bandwidth and with all details. In combination with a particularly low S/N level, high-quality recordings can be reproduced at an impressive level with the XH series.
Details
- 4-channel power amplifier with 2 Ohm load stability
- Aluminum housing for optimal heat dissipation
- Frequency response: 20 Hz - 50 kHz
- Integrated low pass filter (50 Hz~200Hz, -12 dB/oct. (B channel))
- Integrated high pass filter (50 Hz~200Hz & 2.5 ~ 10kHz, -12 dB/oct. (A channel))
- Adjustable input sensitivity (0.2 V - 5 V)
- Power supply with MOS metal-oxide-semiconductor field-effect transistor power transistors
- Housing: 220 x 35 x 169mm (L x H x W)
- Class D amplifier: Yes
- Load: 2Ω Stable
- Rated output power of stereo channels at 4 ohms: 75W x 4
- Rated output power of the stereo channels at 2 ohms: 75W x 2 + 200W x 1 (4Ω)
- Output power in bridge mode (4Ω): 200W x 2
- High-Resolution Audio certified: Yes
- Low-pass filter: Yes
- High-pass filter: Yes
- Transducer power supply: Yes
- Power indicator: Multifunctional
- Automatic switch-on via signal detection: Yes
- Protection circuit: Yes
- Line-In: 4 RCA / Speaker level
- Input selector switch: A/AB
- Speaker level input via line-in (RCA): A-Channel & B-Channel
- Connectors on the front of the amplifier: Yes
- Aluminum enclosure for optimal heat dissipation: Yes
- Rated output power (4Ω, 14.4 V): 75 W x 4 (20 Hz ~ 20000 Hz, 1% distortion)
- Rated output power (2Ω, 14.4 V): 100 W x 4 (1000Hz, 1% distortion)
- Output power in bridge mode (4Ω, 14.4V): 200 W x 2 (1000Hz, 1% distortion)
- Rated output power: 75 watts root mean square x 4 into 4 ohms at 1% distortion
- Low pass filter: 50 ~ 200Hz (-12 dB/oct.)
- High pass filter: 50 ~ 200 Hz & 2.5 ~ 10 kHz (-12dB/oct.)
- Input sensitivity: 0.2 ~ 5V
- Speaker input sensitivity: 4 ~ 12V
- Input impedance: 10 kΩ
- Signal to noise ratio :100 dB
- Signal to noise ratio: 76 dBA (referenced to 1 watt into 4 ohms)
- frequency response (+0 dB, -3 dB): 20 Hz ~ 50000 Hz
- frequency response (+0 dB, -1 dB): 20 Hz ~ 40000 Hz
- Operating voltage: 14.4V (11V ~ 16V allowed)
- Max. Current consumption: 37A
- Dimensions (W x H x D): 220 x 35 x 169(mm),
- Weight: 1,5 kg
Features
Colour | black |
Dimensions (LxWxH) | 28,6 x 27,1 x 7,2 cm |
Dimensions (LxWxH) | 28,6 x 27,1 x 7,2 cm |
Weight | 1,9 kg |
ean | 0019048223302 |
Manufacturer Article No. | XH401-4 |
Legal information
Manufacturer information
JVC KENWOOD
Konrad-Adenauer-Allee 1
61118 Bad Vilbel
Germany
norbert.nieschler@jvckenwood.com