Kenwood X502-1 X-Series, Class D Mono-Channel Power Amplifier 25 Amps
Availability:
Available in 3-5 working days
Only small number of pieces available
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| Class D amplifier | Digital power amplifier with full transmission range |
| Low pass filter | Aluminum housing for optimal heat dissipation |
Product description
The requirements for a power amplifier for mobile use are many and varied. To make installation as easy as possible, the amplifier must be as compact as possible, but still offer plenty of power and impressive sound quality. To meet these requirements, the new Kenwood power amplifier uses modern digital technology, which is not only extremely efficient, but also particularly powerful sound.
All connections are led out of the device on one side of the massive heat sink. This not only looks much better when installed, but also makes installation much easier. The new design with a flat appearance and a unique terminal cover completes the installation perfectly.
Details
All connections are led out of the device on one side of the massive heat sink. This not only looks much better when installed, but also makes installation much easier. The new design with a flat appearance and a unique terminal cover completes the installation perfectly.
Details
- Mono power amplifier
- Class D power amplifier
- Aluminum enclosure for optimal heat dissipation
- Integrated low pass filter
- High level connection for car radios without preamplifier output
- Automatic switch-on via signal detection
- Compact aluminum housing for optimal heat dissipation
- High load stability even at 2 ohms
- Screw terminals
- Class D amplifier: Yes
- Full range digital power amplifier: Yes
- Load: 2Ω Stable
- Rated output power of the stereo channels at 4 ohms: 300W x 1
- Rated output power of the stereo channels into 2 ohms: 500W x 1 (2Ω)
- after: Yes
- Low pass filter: Yes
- Transducer power supply: Yes, with power metal-oxide semiconductor field-effect transistor
- Connections at the front of the amplifier: Yes
- Aluminum housing for optimal heat dissipation: Yes
- Rated output power (4Ω, 14.4 V): 300 W x 1 (20 Hz ~ 200 Hz, 1% distortion)
- Rated output power (2Ω, 14.4 V): 500 W x 1 (100Hz, 1% distortion)
- Rated output power: 300 watts root mean square x 1 into 4 ohms at 1% distortion
- Low pass filter: 50 ~ 200Hz (-12 dB/oct.)
- Bass boost circuit: amplifier B (40Hz, +18dB)
- Input sensitivity: 0.2 ~ 5V
- Input impedance: 10 kΩ
- Signal to noise ratio: 100 dB
- Signal-to-noise ratio: 85 dBA (referenced to 1 watt into 4 ohms)
- frequency response (+0 dB, -1 dB): 20 Hz ~ 200 Hz
- Operating voltage: 14.4V (11V ～ 16V permissible)
- Max. Current consumption: 25A
- Installation dimensions (WxHxD): 213 x 53 x 149 (mm)
- Weight: 1,5 kg
Features
| Dimensions (LxWxH) | 26,1 x 20 x 9,1 cm |
| Dimensions (LxWxH) | 26,1 x 20 x 9,1 cm |
| Weight | 1,6 kg |
| ean | 0019048226297 |
| Manufacturer Article No. | X5021 |
Legal information
Manufacturer information
JVC KENWOOD
Konrad-Adenauer-Allee 1
61118 Bad Vilbel
Germany
norbert.nieschler@jvckenwood.com
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
