Dino KRAFTPAKET battery charger 6/12V 1A

Fully automatic 5-step battery charger with 1A charging current.
The car battery charger is a 5-step car battery charger suitable for charging and trickle charging 6V or 12V lead-acid batteries (batteries) with liquid electrolyte (WET), maintenance-free lead-acid batteries (MF), gel electrolyte (GEL), electrolyte absorbing mats (AGM) or some EFB batteries.
Select the desired charging voltage (6V or 12V) and the microprocessor-controlled charger does everything fully automatically until the completion of the charging cycle and maintenance charge full batteries. The German language display is easy to understand and comfortable to use.

The memory function continues the charging process even after power interruptions without having to start from the beginning.

Four charging programs are available for selection. Fully automatic battery charging takes place in 5 charging steps.

Modern safety technology with reverse polarity protection, overheating protection, overload protection and short circuit protection protects you and the device from incorrect operation.
A cable with clamps is permanently mounted on the jet-proof and dust-tight device (protection class IP65).

Specification: at 12 V: 1 A (+/-10%) / 6 V: 1 A (+/- 10%), microprocessor controlled

Power supply: 220V-240V, 50 Hz
Charging voltage: Normal: 14.4 V (12 V) / 7.2 V (6 V) / AGM 14.7 V (12 V) / 7.4 V (6 V)
Min. battery voltage: 1.9V ± 0.5 V

Charger type: 5 charging steps, automatic charging cycle
Ambient temperature: -10 - +40 °

Battery charger 6V/12V - 4A - display description
Battery type: 6 V/12 V lead-acid, WET, MF, GEL, AGM, stop+go
Recommended battery capacity: 1.2 - 30 Ah

Protection class: IP65, jet water protected

Fuse protection: reverse polarity, thermal and overload protection, timer control

Part no.: 136314

Cable lengths:

Charging cable with clamps: about 1.5 meters
Mains cable: approx. 1.5 meters
The distance between socket & vehicle battery should not exceed three meters.