BusBoxx heckBOXX flex T5 / T6 / T6.1 California Coast / Ocean / Beach Camper rear extension module divided extension depth 750 mmBusBoxx heckBOXX flex T5 / T6 / T6.1 California Coast / Ocean / Beach Camper rear extension module divided extension depth 800 mm
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| loadable up to 250 kilograms | practical |
| versatile | tool-free assembly |
Product description
A rear extension perfectly tailored for the T5/T6 California Coast & Ocean. It is simply inserted into the original seat rail of the T5/T6. No modifications to the vehicle are necessary. All our rear extensions can be used without, with our or with the original multiflex board. From now on our heckBoxxes come divided from 750 mm depth. For the greatest possible flexibility for your use.
The two California pullouts also fit the T6.1 California BEACH with 2-person bench and storage box.
Compact rear pull-out module under the sleeping surface of the Volkswagen T5/T6 Coast and Ocean. By pulling out the heckBOXX, the entire depth of the storage space can be optimally used. Simple, tool-free installation in the Volkswagen's latch rail using two fasteners (included). No changes need to be made to the existing vehicle for installation. The existing sleeping pad (if present) can remain in the vehicle and does not have to be removed for mounting the heckBOXX. The heckBOXX is unlocked by two levers and can then be pulled out. When pulled out, the heavy-duty pull-out is locked to ensure safe loading of the heckBOXX. The two levers must be actuated when sliding in.
Our heckBOXXes are divided from 750 mm depth to give you the greatest possible flexibility in use: Our heckBOXXes are always equipped with a base plate of the same size, to which you can then attach attachments (platforms) of different depths. This way, you can adapt your heckBOXX perfectly to your use as well as extend your rear pull-out later with another add-on part to optimize your storage space.
In the case of a rear extension with a board depth of 750 mm, you can position the rear bench seat to the maximum rear (towards the rear) and thus connect to the Multiflexboard (original Volkswagen or ours). This gives you the most space possible in the middle of the bus. Very popular is the 800 mm board depth, because here perfectly fit 2 standardized Euroboxes (à 40 cm depth) one behind the other on the pull-out. In this case, the rear seat bench is moved forward by only 5-7 cm. The deeper the pull-out, the more you have to push the rear bench seat forward. Of course, if the backseat is folded down as a recliner, the deepest of our pullouts will fit under it. Choose what suits you best.
Details
- Heavy-duty pull-outs with a load capacity of up to 250 kilograms
- maximum load distributed over the entire surface when extended is 150 kg
- Hybrid construction combined with wood composites and metal
- Poplar composite element with 0.8 mm HPL coating on both sides
- completely pre-assembled
- Metal parts powder coated in RAL9005 or galvanized
- Extension length approx. 700 mm
- Outer dimensions width approx. 990 mm - height 65 mm - depth 810 mm (750 mm) - 865 mm (800 mm)
- Storage area inner dimensions width approx. 940 mm - depth from 750 mm -800 mm selectable
- 2 x heavy duty pull-out
- 2 x locks for Volkswagen ratchet rail
- Weight approx. 21,00 kg
- from the floor in the bus to the upper edge of the shelf pull-out is approx. 35 mm
Please note
There may be small fraying or small breakouts in the holes on the underside of the board. Unfortunately, this cannot be prevented. These have no effect on the durability and quality of the product.
They are also not in the field of view, as they are on the underside and are also hidden by the screws.
Features
| Weight | 21 kg |
| Material | Wood |
| Design | Extension depth 750 mm |
| ean | 4251840200785 |
| Manufacturer Article No. | BBWS-1971+BBWS-1975 |
Features
| Weight | 21 kg |
| Material | Wood |
| Design | Drawer depth 800 mm |
| ean | 4251840200792 |
| Manufacturer Article No. | BBWS-1971+BBWS-1980 |
Legal information
Manufacturer information
Bus-Boxx GmbH & Co. KG
Bodenackerstraße 15
96163 Gundelsheim
Germany
q.wiesheu@bus-boxx.de
Legal information
Manufacturer information
Bus-Boxx GmbH & Co. KG
Bodenackerstraße 15
96163 Gundelsheim
Germany
q.wiesheu@bus-boxx.de
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
