BusBoxx heckBOXX flex VW T5 / T6 / T6.1 rear extension module divided depth 750 mmBusBoxx heckBOXX flex VW T5 / T6 / T6.1 rear extension module divided depth 800 mmBusBoxx heckBOXX flex VW T5 / T6 / T6.1 rear extension module divided depth 850 mmBusBoxx heckBOXX flex VW T5 / T6 / T6.1 rear extension module divided depth 900 mmBusBoxx heckBOXX flex VW T5 / T6 / T6.1 rear extension module divided depth 950 mm
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| Hybrid construction | Metal parts powder coated |
| compact | versatile |
Product description
A rear extension that is perfectly tailored for the T5/T6 Multivan & California Beach. It allows the use of many of our modules, as they are tailored exactly to the heckBOXX. It is simply inserted into the original seat rail of the T5/T6. No modifications to the vehicle are necessary. All our heckBOXXes can be used without, with our or with the original multiflexboard.
Our heckBOXXes are divided from 750 mm depth to give you the most flexibility in use: Our heckBOXXes are always equipped with a base plate of the same size, to which you can then attach attachments (platforms) of different depths. This way you can adapt your heckBOXX perfectly to your use as well as expand your rear pull-out later with another add-on part to optimize your storage space.
Compact rear extension module under the multiflex board of the Volkswagen T5/T6. By pulling out the heckBOXX, the entire depth of the storage space can be optimally used. Simple, tool-free installation in the original Volkswagen latch rail using two fasteners (included). No modifications need to be made to the existing vehicle for installation.
The Multiflexboard (both the original from Volkswagen and ours from BusBoxx) can remain in the vehicle and does not have to be removed for mounting the heckBOXX. The heckBOXX is unlocked by two levers and can then be pulled out. The two levers must be actuated during insertion. When pulled out, the heavy-duty pull-out is locked to ensure safe loading of the heckBOXX.
With a rear extension with a board depth of 750 mm, you can position the rear seat up to the maximum backwards towards the rear and thus connect to the Multiflexboard (original Volkswagen or ours). This gives you the most space possible in the middle of the bus.
Very popular is the 800 mm board depth, because here perfectly 2 standardized Euroboxes (à 40 cm depth) fit one behind the other on the pull-out. In this case, the rear seat bench is moved forward by only 5-7 cm. The deeper the pull-out, the more you have to push the rear bench seat forward. Of course, if the backseat is folded down as a recliner, the deepest of our pullouts will fit under it. Choose what suits you best.
Details
- Heavy-duty pull-outs with a load capacity of up to 250 kilograms
- permissible load 150 kilograms
- Hybrid construction combined with wood composites and metal
- Spruce plywood with direct coating on both sides
- Metal parts powder-coated in RAL9005 or galvanized
- Extension length: approx. 711 mm
- Outer dimensions: width approx. 1185 mm - height 65 mm - depth 5 mm+board depth inner dimension
- Storage area inner dimensions: width approx. 1040 mm - depth selectable 750, 800, 850, 900 or 950 mm
- Base plate 450 mm PLUS add-on part in 300 (750), 350 (800), 400 (850), 450 (900) or 500 (950)
- 2 x heavy-duty pull-out
- 2 x locks for Volkswagen grid rail
- Weight approx. 19,00 kg
- maximum load distributed over the entire surface when extended is 150 kg
- from the floor in the bus to the upper edge of the shelf pull-out is approx. 35 mm
Please note
There may be small fraying or small breakouts in the drilling of the holes on the underside of the board. Unfortunately, this cannot be prevented. These have no effect on the durability and quality of the product. They are also not in the field of view, as they are on the underside and are also hidden by the screws.
Features
| Weight | 19 kg |
| Material | Spruce plywood / wood composites and metal |
| Design | Depth 750 mm |
| ean | 4251840200754 |
| Manufacturer Article No. | BBWS-1784+BBWS-1875 |
Features
| Weight | 19 kg |
| Material | Spruce plywood / wood composites and metal |
| Design | Depth 800 mm |
| ean | 4251840200761 |
| Manufacturer Article No. | BBWS-1784+BBWS-1880 |
Features
| Weight | 19 kg |
| Material | Spruce plywood / wood composites and metal |
| Design | Depth 850 mm |
| ean | 4251840201249 |
| Manufacturer Article No. | BBWS-1784+BBWS-1885 |
Features
| Weight | 19 kg |
| Material | Spruce plywood / wood composites and metal |
| Design | Depth 900 mm |
| ean | 4251840201256 |
| Manufacturer Article No. | BBWS-1784+BBWS-1890 |
Features
| Weight | 19 kg |
| Material | Spruce plywood / wood composites and metal |
| Design | Depth 950 mm |
| ean | 4251840200778 |
| Manufacturer Article No. | BBWS-1784+BBWS-1895 |
Legal information
Manufacturer information
Bus-Boxx GmbH & Co. KG
Bodenackerstraße 15
96163 Gundelsheim
Germany
q.wiesheu@bus-boxx.de
Legal information
Manufacturer information
Bus-Boxx GmbH & Co. KG
Bodenackerstraße 15
96163 Gundelsheim
Germany
q.wiesheu@bus-boxx.de
Legal information
Manufacturer information
Bus-Boxx GmbH & Co. KG
Bodenackerstraße 15
96163 Gundelsheim
Germany
q.wiesheu@bus-boxx.de
Legal information
Manufacturer information
Bus-Boxx GmbH & Co. KG
Bodenackerstraße 15
96163 Gundelsheim
Germany
q.wiesheu@bus-boxx.de
Legal information
Manufacturer information
Bus-Boxx GmbH & Co. KG
Bodenackerstraße 15
96163 Gundelsheim
Germany
q.wiesheu@bus-boxx.de
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
