Product details
Mosquito screen on entrance | Power cable duct (E-port) |
connecting channel with hollow seam |
Product description
For vehicles with a gutter height of 170 - 210 cm. Free-standing.
Material:
100 % polyester, polyurethane coated.
Tape closed seam. FLoor: 100%
Polyethylene. Water column: 3,000 mm
Frame:
3 fibreglass poles Ø 11 cm,
6 steel pipe legs Ø 19 cm,
1 steel channel rod Ø 19 mm
Front panel:
• entrance with mosquito doors, can be closed with a zip fastener
• clear film windows (can be completely covered from inside)
• with power cable duct
Side panels:
• left side panel with clear film window (can be completely covered from inside)
• right side panel with clear film window (can be completely covered from inside) and (roll-up) entrance
Rear panel:
• can be rolled down (by means of a zip fastener), creating a windbreak at the bottom
- connecting channel with hollow seam and channel rod
Roof:
• removable polyester roof
• mosquito net sky for good air circulation
general features:
• taped seams
• double-concealed zip fasteners.
• sewn-in groundsheet
• neon green tension lines for more safety
Features
Type of caravan and mobile home awning | Camper awning |
Sewn-in base | |
Scope of delivery | Tent skin, frame, fastening material, packing bag (100 % polyester). |
Colour | pale grey, black |
Weight | 15,3 kg |
Installed height (min.-max.) | 170 - 210 cm |
Dimensions (WxD) | 300 x 370 cm |
Pack size (LxWxH) | 68 x 30 x 30 cm |
Material | Tent: 100 % polyester, Floor: 100 % polyethylene |
Water column | 3000 mm |
ean | 4036231059803 |
Legal information
Fabrikant informatie
Fritz Berger GmbH
Dr. Matthias Herfeld
Fritz-Berger-Strasse 1
92318 Neumarkt
Germany
customer-service@berger-camping.com
Article characteristics
Number of persons
Suitable for sleeping and living for 2 persons
Double covered zippers
Provide additional wind and rain protection at entrances and windows.
Sewn in bottom
Floor is firmly connected to the flysheet. Best possible comfort and protection...
Read more
Floor is firmly connected to the flysheet. Best possible comfort and protection against draughts, insects, dirt and moisture. Also makes it easier to pitch the tent.
Lightweight fiberglass frame
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments...
Read more
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments are connected by a rubber band, thus facilitating assembly Advantage: weight saving.
Taped seams
An adhesive tape provides additional protection for all seams and prevents the...
Read more
An adhesive tape provides additional protection for all seams and prevents the penetration of moisture.
Mosquitogaze
Protection from insects and other small animals. Also serves for air circulation.
Power cable entry (E-Port)
Enables safe power supply with firmly sewn-in bottom. Can be closed by means of a zipper
Water column 3.000 mm
The water column provides information about the material tightness. To...
Read more
The water column provides information about the material tightness. To determine the millimetre value, 10 cm of fabric is stretched under a measuring cylinder and the cylinder is filled with water from above. The limit value at which water droplets press through the material is the maximum water column. In Germany, a tent outer material is considered waterproof from 1500 mm.
Camper
Suitable for camping buses.